The stepper motor standard
R.T.A.’s X-PLUS stepper motor driver is the standard solution for stepper motors! Use the X-PLUS series drivers with STEP/DIR ADVANCED interface for advanced application requiring great dynamic performance, high reliability and simplified power supply. Take advantage of an internal transformer and rectifier for significant cost and space saving.
X-PLUS drivers for precise, quiet and smooth operation
R.T.A. Motion Control Systems‘ X-PLUS series Drivers have a built-in “step & direction advanced” interface, an internal rectifier and a power input directly from the main AC supply (110-230 VAC). Use them for extremely precise and easy control of stepper motors!
They can be used to control standard and industrial NEMA 23 (56 mm) or NEMA 34 (86 mm) stepper motors that are connected to the main AC supply.
Save money and space
You can choose between two versions of X-PLUS motor drivers:
- X-PLUS L2 is smaller, used for smaller, low-power stepper motors,
- X-PLUS B4.1 is larger, used for larger, high-power stepper motors.
A more powerful version of the X-PLUS motor driver is also available with an integrated safety function to safely switch off the stepper motor:
- X-PLUS S4.1 with integrated safety function STO (SIL3).
Main characteristics
Take advantage of the X-PLUS stepper motor drivers for applications requiring great dynamic performance, high reliability and simplified power supply!
Robust and powerful X-PLUS B4.1
X-PLUS S4.1 with integrated safety function
The X-PLUS S4.1 series stepper motor driver is the more powerful representative of the X-PLUS series, which has an integrated safety function for safe shutdown of the stepper motor, STO (SIL3). STO (Safe Torque Off) switches off your engine current without interrupting the current of the drive. Use the STO both to stop the engine in an emergency and to prevent it from starting unexpectedly. STO saves costs for components and space, as you do not need additional interrupts between the motor driver and the motor when the safety function is activated.
The remaining features and applications of this driver, as well as its compatibility with stepper motors, equal the ones of the X-PLUS B4.1 driver.
Stepper motor and driver combo for demanding applications
The SP series industrial stepper motors that are particularly well protected (IP 65) and dust and water resistant are also available. You can use them in very demanding industrial environments. These motors can also be connected with a cable that has an M12 industrial connector.
They provide you with excellent performance, good torque characteristics and high compactness. They are also available with an oil seal on the shaft, for increased resistance to dust and water.
RM series industrial stepper motors R.T.A.
RTA’s RM series industrial stepper motors are robust and have a high protection level (IP 54). You can connect them to the driver with a suitable cable that has an M12 connector. Due to adequate insulation, they can be securely connected to the motor driver with power input directly from the main AC supply (230 V). They are the right choice for your industrial application.
They provide excellent performance – high torque and a favorable torque ratio according to the speed of the stepper motor. They are also distinguished by exceptional compactness.
Keni një pyetje për ne?
Paraqisni pyetjet ose kërkesat tuaja në formularin e hyrjes dhe ne do t’ju kontaktojmë sa më shpejt të jetë e mundur.
