Profinet encoder Hengstler
Take advantage of the absolute encoders from the ACURO series with the Profinet to greately simplify the process of device design and enable reliable communication. Their high accuracy allows increased efficiency, reduced power consumption and lower self-heating of highly dynamic motors.
Get the most out of your machines
Absolute Profinet encoders of the ACURO series are offered by Hengstler for those of you looking to get the most out of your machines, expecting to use latest technology, who want to install an encoder and forget about it and are new to implementing Profinet. You can use one of the top absolute encoders with any Profinet system to greatly simplify the process of device design and enabling reliable communication. The latter is especially important in complex installations and multi-purpose machines.
There are two sub-series of ACURO encoders with the additional Profinet interface available, the ACURO AC58 and ACURO AC61. They also feature standard SSI, BiSS, EtherCAT, Profibus, CANopen, CANlayer2, DeviceNet, Interbus and SUCOnet interfaces.
Properties of the Profinet encoder ACURO series
- Interface Profinet – encoder profil PNO 3.162 Version 4.1 and 4.2
- Temperature range from -40 °C to +85 °C
- Updating of values 125 μs / Cycle time 31.25 μs
- Diagnostic LEDs
- “Best in class” shock and vibration specs
- Device data: position, speed, acceleration, diagnostic data, alarms
- Device configuration: resolution, total measuring range, preset, offset, direction, scaling
- Additional functions: residual value, speed limits, acceleration limits
- High energy efficiency
ACURO AC58 Profinet encoder
- Housing diameter: 58 mm
- Resolution:
- single-turn ST – 10 to 17 bits,
- multi-reverse MT: multi-reverse MT – 12 bits,
- total ST and MT resolution up to 34 bits.
- Linearity: ± ½ value of the least significant bit (LSB) up to 14 Bit
- Absolute accuracy: ±35 ”
- Repeatability: ±10 ”
- Shaft: solid (solid shafts, 6-12 mm) or hollow (hub shafts, 9.52-14 mm), other on request
- Housing design: synchronous, clamping, flat or square design
- Wide supply voltage range 7-30 V
- Connection: 3x M12 connectors (Bus cover)
- Material: shaft – stainless steel, housing – aluminum
- Protection: IP64 or IP67 axis, IP65 or IP67 housing
ACURO AC61 Profinet encoder
- Housing diameter: 61.5 mm
- Resolution:
- single-turn ST – 10 to 17 bits,
- multi-reverse MT: multi-reverse MT – 12 bits,
- total ST and MT resolution up to 29 bits.
- Linearity: ± ½ value of the least significant bit (LSB) up to 14 Bit
- Absolute accuracy: ±35 ”
- Repeatability: ±10 ”
- Shaft: solid (shafts) 9.52 mm or 10 mm
- Housing versions: square version
- Wide supply voltage range 7-30 V
- Connection: 3x M12 connectors (Bus cover)
- Material: shaft and housing – stainless steel
- Protection: IP67
Application examples
You can use Hengstler’s ACURO absolute rotary encoders with Profinet for applications involving motor feedback and automation:
- Packing machines
- Injection molding machines
- Woodworking machines
- Assembly and machining technology
- Transport technology
- Machines for the paper industry and printing
Keni një pyetje për ne?
Paraqisni pyetjet ose kërkesat tuaja në formularin e hyrjes dhe ne do t’ju kontaktojmë sa më shpejt të jetë e mundur.